How to Install your wall mounted words.

​

THINGS YOU WILL NEED:

pencil, drill, 3mm bit, spirit level (optional), masking tape (optional)

​

TIPS

​

Decide where you want your words to hang. If you want them to sit central on a wall; measure both the wall and the words to find a central point and work from the middle out.

​

Either mark a line with a spirit level or hang by eye.

​

Each word (or letter depending on font) will have two bits of wire at a ninety degree angle to the rest of the word. These are the bits you will drill holes for.

You will need to hold the word/letter in the desired position and mark where this point meets the wall.

​

Putting tape around the drill bit helps to prevent drilling too far. The words only need to slot in about 1cm. This gives them a more three dimensional effect standing off of the wall.

​

LETS GET STARTED

​

1. Holding the word/letter mark the wall.

2. Using a 3mm drill bit; drill the holes.

3. Insert your new artwork, sit back and wait for the compliments.

4. Take a picture and tag us on Instagram @wired_mama

​